GMPL-EPE Foam Sheet Production Line
Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
Main Technical Parameters
- Production Efficiency : 1000-2000m/h
- Width of Product(Max) : 1500mm
- Overall Size : 8000mm x 2300mm x 2000mm
- Mounted power : 40kw @ 440 Volts / 50 Hz.
- Total weight : 2.5t
- Utility Rquirements : Compressed Air : 0.2~0.4 m3/min, 0.6Mpa
Machine Unit
- Size of Thickening Roller : 192mm×1600mm
- Material of Thickening Roller : Steel.
- Open and Close method of Thickening roller : Motorized up and down of Two Rolls.
- Drive power : 1.1kW x 3
- Driving method : Gear box driven by Motor, Direct Transmission, Easy Operation, Safety and Beauty.
- Heating Method : Electric Heating
- Heating Box One Set : Composed of 10 Heaters
- Heating Power : 3.5kW x 10 pcs
- Air Engine Power : 1.5KW
- Needle Roller : 100mm x 1600mm
- Haul-Off roller : 100mm x 1600mm
- Haul-Off Material : Rubber
- Open and Close Method : Driven by Cylinder.
- Winding Method : Torque Motor Control
- Winding Motor Torque : 16Nm
Controlling unit
- Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
- THeating Zone : 8 nos.
- Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
- Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
- Other Features : Equipped with Length-Meter counter & Alert-Buzzer System. Length can be freely set as needed. After reaching the set length, the meter counter will give signal.